Neoteck Digital Multimeter Auto Range AC DC Voltmeter Ammeter Backlight Tester With Protective Orange Shell with Stand Built

<p><b>About this item</b><br>【Safety Assurance】Built-in Double Fuse, Overload Protection. Safety Class: IEC 61010-1, CAT II 600V;Comes with a multimeter case, which keeps your multimeter and test leads in good condition, preventing from scratches and dust. Easy to carry and store.<br>【Auto-ranging Tester】Accurately measure AC/DC voltage, AC/DC current, resistance, continuity, capacitance (4-2000uF), frequency (1kHz-200kHz), diode, etc.<br>【Nice Protective Orange Shell with Stand Built】 The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45 Degree Angle and Makes the Screen Easy to See Hands Free<br>【Backlight Display】 Designed with 3 1/2 digit LCD display and 'Backlight', showing the reading clearly in low light areas.</p> <p><br><b>Overview:</b><br>The 8233D PRO multimeter using the word high 15mm LCD display with backlight, even in low light places can clearly read the display value. It's a high performance, high reliability, compact handheld 3 1/2 digit digital multimeter auto range. This Meter is designed to meet IEC 61010-1 &amp; CAT II 600V over voltage category and double insulation. The meter with rubber case, can against the shock of a drop.</p> <p>Measurement: AC DC Voltage, AC DC Current, Resistance, Continuity, Diode, Capacitance, Frequency.</p> <p>Safety Class: IEC 61010-1, CAT II 600V<br>Dual fuse protection:</p> <p>Fuse 1 : rating 250mA/250V</p> <p>Fuse 2 : rating 10A/250V</p> <p>Compared with original model (Neoteck 8233D PRO Digital Multimeter), this new model NTK112C adds a cloth multimeter case.<br>Backlight LCD &amp; Data Hold<br>1. 'Backlight' can help show the reading clearly in low light areas</p> <p>2. If you want to record the measurement value, just press the 'Hold' button, then the reading on the screen will be locked.</p> <p>Nice Protective Orange Rubber Case, against the shock of a drop.</p> <p><br><b>Tips:</b></p> <p>1. The automatic range digital multimeter has a large internal resistance (high input impedance), and there is induced voltage interference when open circuit. The AC DC gear will have a digital jump when it is turned on, but it will not affect the measurement.</p> <p>2. When turning on the meter and move the dial to ohms, it reads of OL (default), it's normal. In this case, it means that Infinity of resistance.<br>NOTE:</p> <p>When you apply the multimeter to test resistance of something, it start to read the real resistance. Please don't worry. There is no need to reset it.<br>You just measure your resistor; it will give the right reading( ignore the reading of OL) ( ignore the reading of OL)</p> <p><b>Multimeter Carrying Case</b><br>Comes with a multimeter case, which keeps your multimeter and test leads in good condition, preventing from scratches and dust. Easy to carry and store.<br> <br><b>Specification:</b><br> DC Voltage: <br> 200mV/ 2V/ 20V/ 200V ±(0.5%+2); 600V ±(0.8%+2) <br> AC Voltage: <br> 2V/ 20V/ 200V ±(0.9%+3); 600V ±(1.2%+3) <br> DC Current: <br> 200uA/ 2000uA/ 20mA/ 200mA/ 10A ±(1.5%+3) <br> AC Current: <br> 200uA/ 2000uA/ 20mA/ 200mA/ 10A ±(1.5%+4) <br> Resistance: <br> 200ohm/ 2Kohm/ 20Kohm/ 200Kohm ±(0.8%+2); 2Mohm/ 20Mohm ±(1.0%+2) <br> Frequency: <br> 1kHz-200kHz (±1%+2) <br> Capacitance: <br> 4-2000uF (±4.0%+5) <br> Diode check: <br> Resolution: 0.001V, Will display the forward drop voltage <br> Continuity check: <br> If measured resistance less than 100Ω, will buzzer is sounded. Sound loudly, Easliy to hear. <br>&nbsp;</p> <p><b>Package List:</b><br>1x NT8233D pro multimeter</p> <p>1x Banana Plug to Alligator Clip Cable</p> <p>1x Test Probe Lead</p> <p>1 x 9V 6F22 Battery</p> <p>1x User Manual</p> <p>1 x Soft Multimeter Carrying Case</p>